Fluke 789 Process Meter (1633984)

    Fluke 789 Process Meter
     

     

    DISCONTINUED

    This product has been discontinued.


    Share this product
    • Product Code.:
      1633984
    • Tech Support Available
    • Product Weight: 2.00
    HAVE A QUESTION?
      Call:   1-847-577-3980
      Send an Email
       Hours:   8:00 am to 4:30 pm CST

    Description

        

    Double Your Power

    The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

    Includes:

    • ProcessMeter
    • AC175 Alligator Clips
    • Four AA 1.5 V alkaline battery (installed)
    • TL71 Safety-Designed Test lead Set

     

    Features

    Features of the Fluke 789
    • 24 V Loop power supply
    • Very large dual display
    • Enhanced backlight with 2 brightness settings
    • 1200 ohm drive capability on mA source
    • HART mode setting with loop power and a built-in 250 ohm resistor
    • 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
    • Externally accessible fuses for easy replacement
    • Infrared-port to process data in FlukeView Forms (V2.1) software


    Fluke 789 features that are also included in the Fluke 787
    • Precision 1000 V, 440 mA True-RMS digital Multimeter
    • 0.1% dc voltage accuracy
    • 0.05% dc current accuracy
    • Frequency measurement to 20 kHz
    • Min/Max/Average/Hold/Relative modes
    • Diode Test and Continuity Beeper
    • Simultaneous mA and % of scale readout
    • 20 mA DC current source / loop calibrator / simulator
    • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
    • Externally accessible battery for easy battery changes

    Safety Conformance

    Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

    Specs

     

    Specifications
    Current Measurement
    Range:  0-1 A AC or DC
    Resolution:  1 mA
    Accuracy:  0.2% + 2 LSD (DC)
       
    Range:  0-30 mA
    Resolution:  0.001 mA
    Accuracy:  0.05% + 2 LSD
    Current Sourcing
    Range:  0-20 mA or 4-20 mA
    Resolution:  0.05% of span
    Drive Capability:  24 V Compliance or 1200 Ω @ 20 mA
    Frequency
       to 19.999 kHz, 0.005% + 1 LSD
    Continuity
       Beeps for resistance < 100 Ω
    Voltage measurement
    Range:  0-1000 V AC (true-rms) or DC
    Resolution:  0.1 mV to 1.0 V
    Accuracy:  0.1% Rdg + 1 LSD (VDC)
    Resistance measurement
       to 40 MΩ, 0.2% + 1 LSD
    Diode test
       2.0 V shows diode voltage drop
    Display current and % of span
       Yes
    Auto step, auto ramp
       Yes

     

    Environmental Specifications
    Operating Temperature
       -20 ºC to 55 ºC
    Storage Temperature
        -40 ºC to 60 ºC
    Humidity (Without Condensation)
       95% up to 30 ºC
       75% up to 40 ºC
       45% up to 50 ºC
       35% up to 55 ºC
    Temperature Coefficient
       0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC)

     

    Safety Specifications
    Electrical Safety
       Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92
    Overvoltage category
       IEC 1010-1 CAT III 1000 V
       IEC 1010-1 CAT IV 600 V
    Maximum voltage
       1000 V rms

     

    Mechanical & General Specifications
    Size
       50 x 100 x 203 mm (1.25" H x 3.41"W x 7.35" L)
    Weight
       610 g (1.6 lbs)
    Batteries
       4 AA Alkaline batteries
    Warranty
       3 years
    Battery Life
       140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
    Shock & Vibration
       Random, 2 g, 5-500 Hz
       1 meter drop test

    RELATED PRODUCTS

    carousel button
    • Fluke TPAK, Meter Hanging Kit
      Fluke TPAK, Meter Hanging Kit
    carousel button